Case has brought the Pocket Hunter out of the Vault for 2020, proving Big Things can come in Small Packages!
Case has been the preeminent producer of traditional pocket knives since the turn of the 20th century, and that means they have built knives on countless patterns. Some of these patterns are made continuously as perennial standbys for the company, like the Peanut and Trapper, but others only appear on certain occasions. Case’s “Out of the Vault” series brings not recently seen patterns back into production, for only one calendar year.
This year’s “Vault” pattern is the Pocket Hunter. The Pocket Hunter is a quirky little pattern that Case seems likely to have invented. It is not one of their oldest patterns, but it hasn’t been produced since its inception in 2001. The Pocket Hunter is a small, like VERY small, version of the classic full size Hunter pattern. It has a tapered handle that turns up at the butt end, with bolsters on both ends. There is a hump, or swell, in the center of the handle on the blade well side. Mine has two blades, a clip point and straight spine (what Case calls a skinner blade), both being full sized. However, like the full sized version, Case has also brought a few single blade versions out of the vault for 2020. It really is just a miniaturized version of the normal (and very large) Hunter pattern in every way.Â
I personally have been interested in this Pocket Hunter pattern from Case for a few years. I almost purchased a “new old stock”, aka still setting on a dealer’s site in new condition from a previous run, but waffled back and forth too long and let it get bought out from underneath me. So when I heard Case was bringing it out of the vault for 2020 I was pretty excited. Case is of course offering the Pocket Hunter in MANY handle cover material options, but I decided to go with the classic yellow synthetic. I went with this handle not only because it’s budget friendly, but also because it’s a classic traditional Case handle material that I have several knives in and because I got the 2019 Vault knife in the same handle material (you can read my article on that knife here and below). Why not start another set / collection, right?! Anyway, I found myself with a Pocket Hunter in Yellow Synthetic as my example of the Case 2020 Vault Knife.
This knife is made much like other Case knives; built well and completely functional, but noticeably imperfect. it came with some slight gaps between both springs and the corresponding mark side liners. This is certainly not a functional issue, but it is something that collectors will notice. both blades came well centered, with nice opening and closing action, and no blade play in either the open or closed positions. The edges came thin, but shockingly rough. I legitimately would love to know what grit Case uses to sharpen their knives, because it’s pretty amazing how toothy they are. This knife seemed to have a burr on both sides, somehow, and felt almost serrated. Thankfully the Tru-Sharp steel is not difficult to sharpen and I removed the burr relatively easily. Lastly, but not least in my opinion, I have to mention that the shield is unpinned (like all Case shields). I’d much prefer no shield over an only glued shield on a knife in this ~$50 price range. Still, overall it’s a well made knife with no practical issues whatsoever and only minor aesthetic imperfections.
To get to the point, I am thoroughly enjoying this Case Pocket Hunter. If you read my articles or watch my videos you might know I enjoy quirky knives, and this is quirky in just how small it is. It’s a pattern known for being overly large, the full size Hunter, shrunk down to Peanut size (but with two full length blades, which is a bonus over the Peanut). I also enjoy small and large versions of patterns; like the GEC #22/#44, #18/#56, and #06/#97 patterns. It feels good in the hand, despite its small size. It’s easy to carry and should be welcome in all but the most anti-knife environments, thanks to its small size. It has satisfying walk and talk, with solid joints. It’s a small knife with big appeal!
The Pocket Hunter not only fits in your back pocket with ease, it will even fit in the smallest of pockets like the 5th pocket (aka watch pocket) or those ludicrously small pockets in women’s jeans. Its daintiness makes me want to get it in abalone (with the added bonus of the abalone version being shield-less). Despite its diminutive size, it is actually a pretty capable knife. The two full size blades make for more usable edge than a Peanut, despite the Pocket Hunter being shorter when closed, and are both shaped in a way that make them practical for a variety of uses. You know, the kind of stuff you actually use your knives for; cutting strings, opening mail, breaking down boxes, etc. I think this little knife will find its way into my pocket frequently, and if you also enjoy a tiny knife that punches above its weight in usefulness then I think it should find its way into your pocket also!
I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts
Share this:
The Police PIG (Pride Integrity Guts) Edition is a Fascinating Piece of Spyderco History
Recently, I found two surprisingly interesting and rare vintage Spyderco knives at a gun show. I am excited about these knives and the history they represent so I’ll be posting shorter than normal articles on both of them, starting with this unique edition of the classic Spyderco Police.
Normally I don’t have much luck at gun shows, flea markets, and the likes. It seems that with eBay a click away, if someone an inkling of what a knife is they can look it up and find the highest price a niche collector was willing to pay for something at least similar… then price it right at that top dollar. At the same time that eBay can be a great market research tool for the collector, it can also mislead the non-collector.
In this instance, I was told that a detective was moving to California and couldn’t take his guns, knives, and ammunition with him. In a way that is sad, but it was an estate sale and the owner himself wasn’t actually there to tell me about his knives.
I noticed this knife first, because I have always been a fan of the stainless handled Spyderco Police. In fact, my uncle carrying one of these when I was young is one of the factors that got me interested in knives in the first place. It’s just such a classic design; the long slender blade, the sleek stainless steel handle, and the meant for business shape.
However, when I picked it up I knew right away it was something special. I’d heard of the “PIG” model only once or twice in my many wanderings of the Spyderco forums and Spyderco section on BladeForums, but it caught my eye right away. The blade has a factory, not aftermarket, engraving that reads:
Pride
Integrity
Guts
Being that the engraving is found on the Police model, it’s an easy connection to realize that this is an acronym for “PIG”. Apparently, this derogatory moniker for law enforcement officials has been turned on its head and made positive through this acronym. Being that Spyderco makes many models intended for first responder use and gives law enforcement and other first responders a significant discount, it’s no surprise that Sal (the founder and owner of Spyderco) decided to make a knife showing their support for police officers.
This interesting edition of the Police provides a great example of Spyderco’s willingness to make unique and quirky knives. It’s one of the characteristics of Spyderco that I most enjoy, and a large part of why I picked up this knife.
Another reason this knife is interesting and worth owning is because it is both old and rare. According to the Spyderco Wiki, this knife was produced between 1984 and 1986, and was one of the very first Police models released if not the very first. Also, it was made in relatively low numbers compared to today’s Spyderco run totals at 2400 made (with 80% being right handed, as mine is). All of this makes for an exceptionally old and rare knife.
Finally, it has aged well for being an almost 40 year old knife. It has what seems to be the factory edge, except for a blunted tip. The handle has scuffs as all stainless handles Spydercos do, but it doesn’t have any major gouges. The lockup is extremely solid, and opening and closing with one hand is easy and smooth. It’s just a great example of the fact that Spyderco has been making really good knives for a long time.
Overall, I’m very happy to have found this piece of knife history in the Spydeco Police PIG edition. It’s an old, well made, and fun knife that’s made for use by people who rely on their knives for their lives. I hope you’ve enjoyed getting to check out the Spyderco Police PIG knife!
