Category: Knife Information

Posted on

3 Budget Friendly EDC Pocket Knives that Make GREAT Last Minute Gifts

Christmas is fast approaching, and if you’re like me then your gift list still has people without checks next to their names. However, at this point you might be getting a little tapped out. You’ve got lots of friends and family that you’re excited to give presents, but they don’t come free!

So, in this article I will recommend three great options of budget friendly knives that make great gifts. These are all modern knives with one hand opening, pocket clips, and locks. I have owned or handled several of each of these, so I am confident in their overall quality, especially considering they’re all under $30!

Byrd Cara Cara 2

The Cara Cara in a stainless steel handle is a great canvas for engraving

Byrd is Spyderco’s budget brand. They’re made in China with less exotic materials than the typical Spyderco, but they seem to be held to a high standard of quality control for their price point. I have actually examined 6 of these, and I’ve been honestly shocked at the consistent quality across all of them. They’ve all had smooth action, solid lock up, and good centering (not all 100% perfect, but none close to rubbing the handles). The Cara Cara 2 is the Byrd version of Spyderco’s well known and loved Endura. It has a 3.75″ blade, which provides ample cutting edge. It comes in several different blade shapes including the classic Endura-like drop point, a serrated sheepfoot, and a spear point with an Emerson Wave Opener. The handles are either fiberglass reinforced nylon, which come in several colors, or stainless steel. I particularly like the stainless steel, and it’s great for engraving. I find the handle to be very ergonomic; honestly it feels better in my hand than that of the Endura. The blade steel is 8cr13mov; lower edge retention and corrosion resistance than the VG10 of an Endura but still very capable and easy to sharpen. The Byrd Cara Cara is a great option if you like the Spyderco aesthetic and emphasis on utility, and offers a great value at around $30. You can find it at many dealers and Amazon, but there are a lot of options available at DLT Trading. There is also a smaller, Delica sized, version called the Meadowlark.

Ontario Rat 1

The Rat 1 with another classic, the Case Trapper

The Ontario Rat 1 is one of the most commonly recommended budget knives. It’s a classic that has been proven to be of high quality. I think I’ve had 3 through the years, and I’ve given at least 3 as gifts. They’ve all come well centered, with no blade play, and smooth. The Rat 1 has an almost straight backed drop point design with a lot of straight edge and an abrupt belly, at about 3.6″. This blade shape works fine for pretty much any usage, and is very similar to that on the classic Sod Buster pattern, although I do prefer blade shapes with less abrupt a belly. The blade steel is Aus8, on which Ontario seems to have really dialed in the heat treat. Mine have always held an edge extremely well, and I’ve seen them stand up to some real abuse. The Rat 1 is right around $30, although it can sometimes be found on sale for less, and most dealers carry it including Amazon. It is available at this link at KnifeCenter, where you can also find the smaller version the Rat 2.

Kershaw Thistle

Nice lines for an inexpensive knife

The Thistle is an interesting model from Kershaw that I really enjoy. I have had a couple of these and have gifted a good several, so I’ve gotten to look over 7. They all had solid lockup and smooth action. 5 of them had perfect or close enough centering, and 2 were a bit off but nowhere near rubbing the handles. The Thistle has a somewhat unique modified liner lock where you push a button on the handle that pushes a bar across and unlocks the liner. This lock allows you to close the knife without putting your fingers in the path of the blade, unlike a normal liner lock. The thing I really like about this knife though, is its design. The handle is nice and simple with great ergonomics and a good bit of grippiness with Kershaw’s “K-Texture”. The blade is a very practical drop point with a good section of straight edge then a nice long sweeping belly. It fits a considerable amount of edge into the handle also, although it’s shorter than the others on this list at 3.25″. The blade steel is 8cr13mov, like on the Cara Cara. Another great thing about the Thistle is that it’s on sale pretty much everywhere! I got mine for Christmas gifts from Smoky Mountain Knife Works at only $9 each, but I think this knife is EASILY worth $30 and offers a similar value as the others on this list.

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts

Posted on

ANNOUNCEMENT! Great Eastern Cutlery will be doing the #62 Easy Pocket Congress pattern in 2020!

Great Eastern Cutlery just posted on their website ( GreatEasternCutlery.NET not .com is the one to follow, FYI) that they’ll be doing the #62 Easy Pocket Congress pattern in 2020!

They’re doing some cool versions! It looks like they’ll be doing one with a banana shield, which is fitting considering the pattern shape. The big surprise to me is that they’re using Unicorn Ivory Acrylic again, considering how much trouble they had with it on the #25s. Of course, there’ll be Jigged Bone and Sambar Stag versions also.

If you’re a fan of the Congress pattern, email your favorite dealer (link to a list of GEC dealers here) and get in on this long awaited run (for some) of the #62 Easy Pocket Congress!

Posted on

Knife Thoughts Full Collection Overview Update

I recently set out to do a full collection overview video. A few people have requested an update to my previous collection videos, and my collection has changed some since I made those first videos. I intended to do the video rapid fire style and condense it into one video with a run time of under an hour. However, I had to stop filming after the fixed blades and modern knives and realized the length would necessitate a two part series. I intended to cover all of my traditional folding knives in the second video, but it just took too long covering the non – GECs. So 3 parts it is! I hope my enthusiasm for knives comes through in full force and you derive some enjoyment from perusing my collection along with me.

Part 1: Fixed Blades and Modern Folding Knives

Part 1: Fixed Blades and Modern Folding Knives

Part 2: Non – GEC Traditional Folding Knives

Part 2: Non – GEC Traditional Folding Knives

Part 3: Great Eastern Cutlery Folding Knives

Part 3: Great Eastern Cutlery Traditional Folding Knives

I appreciate all of you who watch my videos, especially these longer ones. They certainly make for marathon watch sessions. I often watch longer knife videos in parts while I’m cooking and things like that, and I find it’s a great way to take in a full video even on a busy schedule. Although I have a solid core of keepers, there are always lots of ins and outs in my collection so it’s nice to put a snapshot out there of how it stands at this time. Don’t forget to subscribe to my blog here by entering you email, and subscribe to my YouTube channel at this link.

Posted on

What is a “Parts Knife” or “Special Factory Assembly” from Great Eastern Cutlery?

Great Eastern Cutlery is wont to run by their own rules. Quirkiness is one of their most characteristic attributes, and both the boon and bane of collectors depending on the situation. One example of their unusual approach to knifemaking can be seen in their “parts” aka “special factory assembly” knives. This article will explain what these knives are, how they are purchased, and how they fit into the collector market.

My haul from the 2019 GEC Rendezvous

These knives are built using leftover parts from previous runs of knives. Sometimes they are made from recent runs within the same year, and sometimes they’re made with parts from frames that haven’t been used for several years (like this year’s #65s). They often feature different handle materials, shields, and sometimes even different blade or handle shapes than previous runs (from which they drew their parts). For example, at this year’s Rendezvous (2019) GEC had lots of knives built with parts left over from previous runs: #65 Ben Hogans, #85s in different configurations than the normal runs, #97s with the Tango guitar shield (which they haven’t used in a while), and even some stainless #74 Mustangs (I was lucky enough to snag one!). Due to being made in previously unused configurations with old stock parts, you never know what these knives are going to show up as!

The Special Factory Assembly aka parts knives for 2019

GEC first referred to these knives in question as “parts knives” but has transitioned into calling them the more official sounding “special factory assembly” knives. This change in nomenclature has happened over the past two or so years, in conjunction with a change in how they are sold. These knives are only available for purchase at the factory store. They are made for the annual Rendezvous (if you’d like to learn more about why the Rendezvous is worth attending, read my article linked here). Originally, up until 2017 or 2018, there was no restriction on the number of these knives that one could purchase at a time. However, recently GEC has restricted each person to one “SFA” knife per transaction / time through the line at the Rendezvous / day at the Rendezvous. This rule makes it more difficult for a large number of these knives to be concentrated in one person’s collection, therefore making them even rarer and more sought after on the secondary market.

Not technically a Special Factory Assembly, but definitely a parts knife. #93 Lambfoot for Charlie Campagna, 1 of 27

These “special factory assembly” knives are sought after for several reasons. First, they tend to be made in low numbers. GEC has moved generally toward larger runs, so the fact that these parts knives are still made in runs of 4-40 knives makes them quite rare relative to other recent runs. On top of this, many of this year’s SFA knives were “S” models (I’ll be doing an article on what this means also, so make sure you subscribe via email for updates) which are less desirable due to their lack of warranty and supposed lower aesthetic quality. Beyond their rarity, the sheer fact that the SFA knives can only be purchased at the factory store makes them more difficult to purchase, and therefore more valuable. The “special factory assembly” knives tend to be highly sought after, especially just after the Rendezvous.

2019 Special Factory Assembly GEC #74 Mustang

I personally enjoy the “parts” aka “special factory assembly” knives because they’re just plain unique and interesting. I also enjoy that they’re a hallmark of and a keepsake from each Rendezvous. If you ever get a chance to pick one up, I highly suggest you do!

Posted on

Knife Thoughts at the 2019 Great Eastern Cutlery Rendezvous

This past weekend Great Eastern Cutlery held their yearly Rendezvous. It’s a combination of several things: a gathering of GEC enthusiasts, an open house, and (since 2018) a small knife show. I’ve gone the last 6 years, and always look forward to the trip. If you want to know more about the Rendezvous in general, checkout my article here:

Why All Traditional Knife Enthusiasts Should Attend the Great Eastern Cutlery Rendezvous

2019 is the second year GEC has offered tents and tables for collectors and vendors to set up displays, and this year I decided to set up as Knife Thoughts. I wasn’t sure that it was a good idea to set up a display, being that my collection and knowledge pale in comparison to that of many of the collectors who attend the Rendezvous, but I decided to go for it. I thought I could offer something worthwhile mainly by displaying the last 6 years (2019 inclusive) of Rendezvous Specials. In all the years I’d gone, I never saw any of the Rendezvous Specials displayed and I felt people would enjoy seeing them. I also wanted to display my Allegheny Mountain Knife Collectors Association club knives.

  • 2019 Rendezvous Special
  • 2019 Special Factory Assembly
If you want to know more about the parts knives, subscribe for updates via email, as I plan to write a short article explaining them.

After waiting in line all night and getting my 2019 Rendezvous Special and a Special Factory Assembly, I set up my first public knife display! I used a very nice stepped display given to me by my wife to display the Rendezvous Specials, a magnetic kitchen knife holder to display some fixed blades, and laid out many of my traditional pocket knives in a semblance of order.

Knife Thoughts display the 2019 GEC Rendezvous (and a little shirt flair)

It turned out to be a great experience! I had many people stop at my table to discuss the knives and GEC in general. I also got to see some old friends from previous Rendezvous, and meet many new friends. I got to meet and talk with Mike of Collector Knives, Austin of C. Risner / Traditional Pocket Knives, and Jamie of JSR Sports & More. I also got to see and talk with Ken of Blue Creek Cutlery / Maher & Grosh, as well as Gary of Kifer Cutlery Classics, whom I’ve seen at previous Rendezvous. It’s always a treat to get to discuss knives with others who share your enthusiasm for all things cutlery!

  • The line to get in at 7am just before they opened the doors
  • The Special Factory Assembly aka parts knives for 2019

I also learned a few things in the process. First, I should bring knives I plan to sell and have their prices pre-determined. Pretty much everyone who came to my table asked if I was selling. Even the knives I was willing to sell, I didn’t pre-plan pricing which made it awkward trying to give an asking price. Second, it would be easier to have a table and still be able to look around at the other displays with a partner to help watch. Thirdly, I should have a Knife Thoughts shirt and/or banner to help distinguish and identify my display (rather than just stickers). So not only was this Rendezvous a fun time, it was a learning experience to help improve Knife Thoughts displays at future shows.

A Special Factory Assembly #93 Lambfoot for Charlie Campagna