GEC Rendezvous FAQ: Everything You Need to Know

So you’re falling down the slippery slope of traditional pocket knives, and you’ve been intrigued by the “GEC Rendezvous“. The Rendezvous is Great Eastern Cutlery‘s yearly gathering to celebrate classic knives and the people who can’t get enough of them. This article will answer your burning questions about the Rendezvous!

Why go to the Rendezvous?

There are lots of reasons to go to the Rendezvous, some of which I have written about in the past (2021, 2019). Of course, there are the special and limited edition knives that can only be purchased at the Rendezvous. There are also some vendors such as Lynch Leather, some vintage knife resellers, and of course yours truly… Knife Thoughts. That said, most people consider the opportunity for camaraderie with fellow traditional knife enthusiasts to be the main draw. There’s just something special about being at the factory that makes these incredible knives we love, and getting to spend time with other people who share our passion. Another big value of going to the Rendezvous is the opportunity to meet and talk with Bill, William, Joan Mae, Randy, and all of the great people at Great Eastern Cutlery who actually make the knives.

Can you tour the factory?

Yes… and no. Since the Covid-19 pandemic, GEC has offered “self guided tours” through the factory. What this amounts to is the ability to walk around the factory hallway, with views into many (but not all) of the processes. It doesn’t include a guide with explanations of the process, as it did previously. To be honest, these self guided tours pale in comparison to the (often lengthy) tours that were given in the past. Still, even a self guided tour provides ample opportunity to see behind the scenes and get a good look at the knives being made.

The factory floor

How does buying knives at the Rendezvous work?

Special knives are part of the draw of the Rendezvous, so it’s helpful to know how they are actually sold. Attendees will get a ticket from GEC staff once the store opens. For those who lined up ahead of time there is often a previous informal number system (this year a Barlow Bearcat Club member made numbered brass tags), which can be exchanged for an official ticket. In past years, only five people have been allowed in the store at a time. You are allowed to enter once someone leaves and a staff member calls your ticket number. You can get another ticket once you have gone through the store, which will allow you to go in again after everyone who currently had a ticket has gone through. Once in the store, there isn’t technically a time limit, but you shouldn’t dillydally. In past years, you have only been able to purchase two knives for each trip through the store. That includes Rendezvous Special knives, SFA knives, or otherwise. That said, as mentioned below, you can only purchase one of the Rendezvous Special knives period (no matter the number of times you go through the store). It can take a while to get back around to your number for a second trip, so make sure you get a second ticket as you leave the store if you’d like a second trip and then spend some time perusing the exhibitors’ tables and meeting other enthusiasts.

The long wait (longer every year!) comes to an end

What is the Rendezvous Special knife?

The Rendezvous Special is a knife made to commemorate the Rendezvous each year. It’s made in limited quantities, not disclosed until the event begins, usually around 50 pieces. Those 50 pieces are spread across both days, with about 30 available Friday and 20 Saturday. Each attendee can only purchase one Rendezvous Special, and GEC keeps a list of who buys what knife. They are usually special in some way, like using stag or a unique shield. I have personally made a collection of these knives over the last 10 years of attending the Rendezvous, as I think they are a great representation of the special event each year.

10 years of Rendezvous Special knives

What is a Special Factory Assembly?

Special Factory Assembly knives, or SFAs, are knives put together in unique configurations for the Rendezvous. These were formerly called parts knives, because they often use leftover parts from previous runs (sometimes several years past). They can have different cover materials, blade configurations, shields, etc. and are often made in low numbers. In fact, these SFAs are considered by some to be the real gems of the Rendezvous due to their limited and unique nature. Many SFAs in recent years have been S knives, which are essentially cosmetic seconds and don’t carry the warranty. One should keep a sharp eye out when entering the store during the Rendezvous, as especially attractive SFAs can sometimes hide in plain sight.

An SFA #25 with two other patriotic GECs

How early do I have to get there to buy a Rendezvous Special knife?

Honestly, it’s impossible to know. I thought last year couldn’t be beaten, when I got there at 10:15 Thursday morning and was already the 27th place in line. But alas, I was foolish to think that people wouldn’t take it further. This year, 2024, two long time fans (and friends of mine, no negativity thrown their way here!) parked a camper outside the factory on the SUNDAY before, a full 5 days before the event. Not only that, but I’m told as of today (Wednesday, two full days before) there are over 15 people waiting. That said, last year people who got there relatively late (meaning in the early morning on Friday, say 5am or so) were able to get a Rendezvous Special because some people passed on them. It’s just not something that can be calculated in advance, but the baseline seems to have passed my reckoning. My understanding is that getting a knife is often easier on Saturday, despite the lower number available. Either way, good luck to anyone who goes for a Rendezvous Special!

The man himself, Bill, showing off a past Rendezvous Special

Should I say hello to the guy wearing a Knife Thoughts shirt?

Yes! I can likely be found sitting at a table exhibiting for Knife Thoughts and / or the Barlow Bearcat Club, talking with other enthusiasts and perusing their tables, or oogling all the great knives in the store. Please stop and say hello, introduce yourself (I’m not good at putting usernames to faces), and grab some Knife Thoughts swag! My favorite part of the Rendezvous is seeing other enthusiasts, so please help the Rendezvous be great and don’t be a stranger.

Processing…
Success! You're on the list.

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts