GEC Rendezvous FAQ: Everything You Need to Know

So you’re falling down the slippery slope of traditional pocket knives, and you’ve been intrigued by the “GEC Rendezvous“. The Rendezvous is Great Eastern Cutlery‘s yearly gathering to celebrate classic knives and the people who can’t get enough of them. This article will answer your burning questions about the Rendezvous!

Why go to the Rendezvous?

There are lots of reasons to go to the Rendezvous, some of which I have written about in the past (2021, 2019). Of course, there are the special and limited edition knives that can only be purchased at the Rendezvous. There are also some vendors such as Lynch Leather, some vintage knife resellers, and of course yours truly… Knife Thoughts. That said, most people consider the opportunity for camaraderie with fellow traditional knife enthusiasts to be the main draw. There’s just something special about being at the factory that makes these incredible knives we love, and getting to spend time with other people who share our passion. Another big value of going to the Rendezvous is the opportunity to meet and talk with Bill, William, Joan Mae, Randy, and all of the great people at Great Eastern Cutlery who actually make the knives.

Can you tour the factory?

Yes… and no. Since the Covid-19 pandemic, GEC has offered “self guided tours” through the factory. What this amounts to is the ability to walk around the factory hallway, with views into many (but not all) of the processes. It doesn’t include a guide with explanations of the process, as it did previously. To be honest, these self guided tours pale in comparison to the (often lengthy) tours that were given in the past. Still, even a self guided tour provides ample opportunity to see behind the scenes and get a good look at the knives being made.

The factory floor

How does buying knives at the Rendezvous work?

Special knives are part of the draw of the Rendezvous, so it’s helpful to know how they are actually sold. Attendees will get a ticket from GEC staff once the store opens. For those who lined up ahead of time there is often a previous informal number system (this year a Barlow Bearcat Club member made numbered brass tags), which can be exchanged for an official ticket. In past years, only five people have been allowed in the store at a time. You are allowed to enter once someone leaves and a staff member calls your ticket number. You can get another ticket once you have gone through the store, which will allow you to go in again after everyone who currently had a ticket has gone through. Once in the store, there isn’t technically a time limit, but you shouldn’t dillydally. In past years, you have only been able to purchase two knives for each trip through the store. That includes Rendezvous Special knives, SFA knives, or otherwise. That said, as mentioned below, you can only purchase one of the Rendezvous Special knives period (no matter the number of times you go through the store). It can take a while to get back around to your number for a second trip, so make sure you get a second ticket as you leave the store if you’d like a second trip and then spend some time perusing the exhibitors’ tables and meeting other enthusiasts.

The long wait (longer every year!) comes to an end

What is the Rendezvous Special knife?

The Rendezvous Special is a knife made to commemorate the Rendezvous each year. It’s made in limited quantities, not disclosed until the event begins, usually around 50 pieces. Those 50 pieces are spread across both days, with about 30 available Friday and 20 Saturday. Each attendee can only purchase one Rendezvous Special, and GEC keeps a list of who buys what knife. They are usually special in some way, like using stag or a unique shield. I have personally made a collection of these knives over the last 10 years of attending the Rendezvous, as I think they are a great representation of the special event each year.

10 years of Rendezvous Special knives

What is a Special Factory Assembly?

Special Factory Assembly knives, or SFAs, are knives put together in unique configurations for the Rendezvous. These were formerly called parts knives, because they often use leftover parts from previous runs (sometimes several years past). They can have different cover materials, blade configurations, shields, etc. and are often made in low numbers. In fact, these SFAs are considered by some to be the real gems of the Rendezvous due to their limited and unique nature. Many SFAs in recent years have been S knives, which are essentially cosmetic seconds and don’t carry the warranty. One should keep a sharp eye out when entering the store during the Rendezvous, as especially attractive SFAs can sometimes hide in plain sight.

An SFA #25 with two other patriotic GECs

How early do I have to get there to buy a Rendezvous Special knife?

Honestly, it’s impossible to know. I thought last year couldn’t be beaten, when I got there at 10:15 Thursday morning and was already the 27th place in line. But alas, I was foolish to think that people wouldn’t take it further. This year, 2024, two long time fans (and friends of mine, no negativity thrown their way here!) parked a camper outside the factory on the SUNDAY before, a full 5 days before the event. Not only that, but I’m told as of today (Wednesday, two full days before) there are over 15 people waiting. That said, last year people who got there relatively late (meaning in the early morning on Friday, say 5am or so) were able to get a Rendezvous Special because some people passed on them. It’s just not something that can be calculated in advance, but the baseline seems to have passed my reckoning. My understanding is that getting a knife is often easier on Saturday, despite the lower number available. Either way, good luck to anyone who goes for a Rendezvous Special!

The man himself, Bill, showing off a past Rendezvous Special

Should I say hello to the guy wearing a Knife Thoughts shirt?

Yes! I can likely be found sitting at a table exhibiting for Knife Thoughts and / or the Barlow Bearcat Club, talking with other enthusiasts and perusing their tables, or oogling all the great knives in the store. Please stop and say hello, introduce yourself (I’m not good at putting usernames to faces), and grab some Knife Thoughts swag! My favorite part of the Rendezvous is seeing other enthusiasts, so please help the Rendezvous be great and don’t be a stranger.

Processing…
Success! You're on the list.

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts

Bootleg 2020; A Smashing Success!

I attend the Great Eastern Cutlery Rendezvous every year. It’s a gathering of traditional knife enthusiasts at the GEC factory to show and discuss knives, take tours of the factory, and get some unique knives. You can find more information in the following article:

Unfortunately, due to the Corona Virus crisis, Great Eastern Cutlery decided to cancel the Rendezvous this year. It was a big disappointment to me, and I’m sure to many others, but I understand why they had to make the decision.

Relatively quickly after this decision was announced, some regular attendees set in motion to organize an unofficial gathering in place of the Rendezvous. Jesse W. contacted the location and caterer that was always used for the Saturday picnic and, along with contributions from Gary K. and Darren O., set up a replacement gathering. Setting this all up was no small feat, I’m sure, and set the stage for the success of the event.

In the process of being setup the event began to be called “Bootleg”. I decided that if we couldn’t have a Rendezvous Special knife, it would be nice to have at least something to commemorate the event. Since GEC often includes pins with their knives and has been making special pins for the last few years’ Rendezvous, I decided to make pins for all the attendees. I’m no graphic designer, by any stretch of the word, but I came up with something and got a bunch made by Sticker Mule (who I’ve used for several sticker designs). I was happy to make a small contribution, and I was surprised to find Randy (an engineer at GEC and fellow knife enthusiast) laser etching the logo onto all kinds of things: slips, sheaths, and even knives! It was a very nice gesture that allowed people to go home with mementos of the event.

The event was well attended and a whole lot of fun. A significant group of regular Rendezvous attendees, as well as some GEC employees, showed up. The hours rushed by while we all showed and discussed our knives, knife history, and all kinds of knife related topics. I had a great time, and I think others did also.

Still, I’m looking forward to next year and having the full Rendezvous. If you plan to attend next year’s Rendezvous, consider joining this Facebook group. I’ll be there!

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts

Great Eastern Cutlery Cancels 2020 Rendezvous

If I’m being honest, I saw it coming; Pennsylvania has extended the state of emergency, safety measures that had been relaxed have been reinstated, and the Titusville Oil Festival (with which the GEC Rendezvous was always concurrently held) was canceled. Still, I’m sure it was a hard decision for Bill and everyone at GEC to make, and I’m very crestfallen.

If you want to learn more about the Rendezvous, check out the article at this link.

The perfect meme for this news

I collect the Rendezvous Special knives, which you can only get at the Rendezvous. Check out this link and this link for videos on those knives. Still, worse than not having the opportunity to obtain this year’s piece of that collection is the missed discussions with other enthusiasts (and many collectors with much more knowledge than me, from whom I’ve learned a lot at past Rendezvous). However, it would have been difficult to maintain the current safety protocols and enjoy the Rendezvous as it has been in the past. Hopefully GEC has something else fun up their sleeve, and hopefully this isn’t too much of a blow to them.

What is a “Parts Knife” or “Special Factory Assembly” from Great Eastern Cutlery?

Great Eastern Cutlery is wont to run by their own rules. Quirkiness is one of their most characteristic attributes, and both the boon and bane of collectors depending on the situation. One example of their unusual approach to knifemaking can be seen in their “parts” aka “special factory assembly” knives. This article will explain what these knives are, how they are purchased, and how they fit into the collector market.

My haul from the 2019 GEC Rendezvous

These knives are built using leftover parts from previous runs of knives. Sometimes they are made from recent runs within the same year, and sometimes they’re made with parts from frames that haven’t been used for several years (like this year’s #65s). They often feature different handle materials, shields, and sometimes even different blade or handle shapes than previous runs (from which they drew their parts). For example, at this year’s Rendezvous (2019) GEC had lots of knives built with parts left over from previous runs: #65 Ben Hogans, #85s in different configurations than the normal runs, #97s with the Tango guitar shield (which they haven’t used in a while), and even some stainless #74 Mustangs (I was lucky enough to snag one!). Due to being made in previously unused configurations with old stock parts, you never know what these knives are going to show up as!

The Special Factory Assembly aka parts knives for 2019

GEC first referred to these knives in question as “parts knives” but has transitioned into calling them the more official sounding “special factory assembly” knives. This change in nomenclature has happened over the past two or so years, in conjunction with a change in how they are sold. These knives are only available for purchase at the factory store. They are made for the annual Rendezvous (if you’d like to learn more about why the Rendezvous is worth attending, read my article linked here). Originally, up until 2017 or 2018, there was no restriction on the number of these knives that one could purchase at a time. However, recently GEC has restricted each person to one “SFA” knife per transaction / time through the line at the Rendezvous / day at the Rendezvous. This rule makes it more difficult for a large number of these knives to be concentrated in one person’s collection, therefore making them even rarer and more sought after on the secondary market.

Not technically a Special Factory Assembly, but definitely a parts knife. #93 Lambfoot for Charlie Campagna, 1 of 27

These “special factory assembly” knives are sought after for several reasons. First, they tend to be made in low numbers. GEC has moved generally toward larger runs, so the fact that these parts knives are still made in runs of 4-40 knives makes them quite rare relative to other recent runs. On top of this, many of this year’s SFA knives were “S” models (I’ll be doing an article on what this means also, so make sure you subscribe via email for updates) which are less desirable due to their lack of warranty and supposed lower aesthetic quality. Beyond their rarity, the sheer fact that the SFA knives can only be purchased at the factory store makes them more difficult to purchase, and therefore more valuable. The “special factory assembly” knives tend to be highly sought after, especially just after the Rendezvous.

2019 Special Factory Assembly GEC #74 Mustang

I personally enjoy the “parts” aka “special factory assembly” knives because they’re just plain unique and interesting. I also enjoy that they’re a hallmark of and a keepsake from each Rendezvous. If you ever get a chance to pick one up, I highly suggest you do!

Why All Traditional Knife Enthusiasts Should Attend the Great Eastern Cutlery Rendezvous

Every year Great Eastern Cutlery holds their Rendezvous at their factory in historic Titusville Pennsylvania. It is a 3 day gathering for fans of GEC to come together and show and tell their traditional knives (it’s not restricted to GEC, other brands’/companies’ knives are very welcome). There’s also a picnic on Saturday where GEC collectors and employees get together to eat and enjoy the company of fellow knife enthusiasts. You can find more information by following this link to Great Eastern Cutlery’s page for this year’s (2019) Rendezvous!

A fine example of a GEC, a #53 Cuban Stockman, in its native territory of Western Pennsylvania

You get to see behind the curtain!

One of the best things about the Rendezvous is getting to see how all the knives are made. Throughout the weekend tours are given by none other than GEC President Bill Howard and his son Will. First off, the fact that the owner himself gives tours is a great look into the culture and workings of GEC. Bill Howard is a man who knows and cares about his products, machinery, and his employees. Second, it’s an incredible opportunity to see every step of the process (except bone dyeing and jigging, which is proprietary and not shown to the public) that goes into making a GEC knife. Let me tell you, it’s impressive to see just how much hand work goes into these knives. Third, it’s a chance to ask any of the questions you have about their production process. I know I’ve had many questions, and they seem happy to answer them. If you want a sneak preview of the tour you can check out a video tour below. It’s a great resource, but it’s not quite as good as in person!

Part 1, you’ll have to go to YouTube for parts 2 and 3

The people are great!

Meeting and conversing with the GEC employees and other Rendezvous attendees is definitely the highlight of the experience. Being that GEC is the most highly respected and sought after production knife maker in America today, the Rendezvous brings together a large and varied group of knife enthusiasts. Over the years that I’ve attended it has grown significantly. There is still the core group of hardcore knife collectors. These are the people who are basically walking encyclopedias of traditional knives, and it’s a treasure to get to discuss the history and nuances of all their knives. There are also now tables set up for people to display their collections and / or knives for sale. For example, last year the owners of the Maher & Grosh set up an extremely interesting display of vintage knives of that brand and also sold some GEC made M&G brand knives. As mentioned earlier, it’s also enlightening to get to know the people who make up GEC. Of course the knives are what makes us so enamored with GEC, but it’s certainly nice to get to meet the people behind the knives and see that they are (in many cases) as excited about what they’re doing as we are.

The #78 American Jack in Glitter Gold in the center is a 1 of 8 parts knife from the 2018 Rendezvous

Titusville has more to do than you think!

I often see people wondering what, if anything, else there is to do in Titusville. After all, it’s not your usual vacation location. I think the tendency is for people to assume there’s nothing to do, but that’s very much not the case! There is the annual Titusville Oil Festival. It is a celebration of the anniversary of the first oil well in the U.S. which was drilled in Titusville, and you can find more information at this link. There is also a craft brewery called the Blue Canoe that has classic food and good drinks, made right there on site. Speaking of the history of oil in Titusville, the site of the first oil well has a very interesting museum. It is called the Drake Well, and you can find more information about the museum at this link. I was always told by my dad, an avid fan of local history and himself in the natural resources industry, that the Drake Well was the first well drilled for oil in the world (and certainly some history books confirm this), but I’ve also read that oil wells were drilled earlier in China. Either way, it’s worth a visit if you’re interested in history. Another place well worth visiting, right next to the Drake Well, is Oil Creek State Park. Oil Creek State Park is a nice little park with some interpretive trails, hiking/biking, and some nice scenery. You can find a list of some good things to do at the park at this link. If you wanted to make a serious knife and history trip out of it, you could go to nearby Tidioute (where natural gas was found, and helped create the history of cutlery in the region) or relatively close by Bradford, where you can visit Case’s factory. Finally, there’s going to be a knife show the same weekend held as a replacement for the Queen show (that was always held on the same weekend as the Rendezvous). I know about this show because it’s being organized by a member of the Allegheny Mountain Knife Collectors Association, but I can’t find a website for it so I can’t provide much more information, though I’m sure once you’re at the Rendezvous it’ll be easy to find more info.

Retouched photograph of the Drake Well, from WikiPedia Media Commons

There’s some SUPER cool knives to be had!

Last, but not least, GEC makes some really unique and interesting knives for the Rendezvous. To start, they make a very limited run of “Rendezvous Special” knives. These are the knives made to commemorate that year’s Rendezvous. They make a fixed number, 50 the last couple years, and sell a fixed portion of that each day. You have to get there early to get one, but Friday and especially Saturday seem to be less busy than Thursday. They also make parts knives, knives put together with parts left over from previous runs. These parts knives often have unique handle materials that differ from those used in the normal run. They also often are made in even lower numbers than the Rendezvous Specials, so they’re quite desirable to collectors. Last year GEC only allowed each person to purchase 1 parts knife, and I have heard that they plans to restrict each household to 1 Rendezvous Special and 1 parts knife this year, but that hasn’t been confirmed. Either way, they do a good job of keeping it fun and fair. I’ve been happy to collect the Rendezvous Specials from all the years I’ve attended.

The Rendezvous Specials from the last 5 years

So, will you be there?

I have attended the last 5 Rendezvous, since 2014, and I’m more excited for this one than any other! I hope to see lots of new faces and get to know lots of new people. I have created a facebook group for those planning to attend. You can find the group and request to join by following this link, just make sure to answer the questions. Hope to see you in Titusville!

This year’s Rendezvous is August 8th, 9th, and 10th. It’s at the Great Eastern Cutlery factory at:

Great Eastern Cutlery Factory

Caldwell Street

Titusville, PA 16354