GEC Rendezvous FAQ: Everything You Need to Know

So you’re falling down the slippery slope of traditional pocket knives, and you’ve been intrigued by the “GEC Rendezvous“. The Rendezvous is Great Eastern Cutlery‘s yearly gathering to celebrate classic knives and the people who can’t get enough of them. This article will answer your burning questions about the Rendezvous!

Why go to the Rendezvous?

There are lots of reasons to go to the Rendezvous, some of which I have written about in the past (2021, 2019). Of course, there are the special and limited edition knives that can only be purchased at the Rendezvous. There are also some vendors such as Lynch Leather, some vintage knife resellers, and of course yours truly… Knife Thoughts. That said, most people consider the opportunity for camaraderie with fellow traditional knife enthusiasts to be the main draw. There’s just something special about being at the factory that makes these incredible knives we love, and getting to spend time with other people who share our passion. Another big value of going to the Rendezvous is the opportunity to meet and talk with Bill, William, Joan Mae, Randy, and all of the great people at Great Eastern Cutlery who actually make the knives.

Can you tour the factory?

Yes… and no. Since the Covid-19 pandemic, GEC has offered “self guided tours” through the factory. What this amounts to is the ability to walk around the factory hallway, with views into many (but not all) of the processes. It doesn’t include a guide with explanations of the process, as it did previously. To be honest, these self guided tours pale in comparison to the (often lengthy) tours that were given in the past. Still, even a self guided tour provides ample opportunity to see behind the scenes and get a good look at the knives being made.

The factory floor

How does buying knives at the Rendezvous work?

Special knives are part of the draw of the Rendezvous, so it’s helpful to know how they are actually sold. Attendees will get a ticket from GEC staff once the store opens. For those who lined up ahead of time there is often a previous informal number system (this year a Barlow Bearcat Club member made numbered brass tags), which can be exchanged for an official ticket. In past years, only five people have been allowed in the store at a time. You are allowed to enter once someone leaves and a staff member calls your ticket number. You can get another ticket once you have gone through the store, which will allow you to go in again after everyone who currently had a ticket has gone through. Once in the store, there isn’t technically a time limit, but you shouldn’t dillydally. In past years, you have only been able to purchase two knives for each trip through the store. That includes Rendezvous Special knives, SFA knives, or otherwise. That said, as mentioned below, you can only purchase one of the Rendezvous Special knives period (no matter the number of times you go through the store). It can take a while to get back around to your number for a second trip, so make sure you get a second ticket as you leave the store if you’d like a second trip and then spend some time perusing the exhibitors’ tables and meeting other enthusiasts.

The long wait (longer every year!) comes to an end

What is the Rendezvous Special knife?

The Rendezvous Special is a knife made to commemorate the Rendezvous each year. It’s made in limited quantities, not disclosed until the event begins, usually around 50 pieces. Those 50 pieces are spread across both days, with about 30 available Friday and 20 Saturday. Each attendee can only purchase one Rendezvous Special, and GEC keeps a list of who buys what knife. They are usually special in some way, like using stag or a unique shield. I have personally made a collection of these knives over the last 10 years of attending the Rendezvous, as I think they are a great representation of the special event each year.

10 years of Rendezvous Special knives

What is a Special Factory Assembly?

Special Factory Assembly knives, or SFAs, are knives put together in unique configurations for the Rendezvous. These were formerly called parts knives, because they often use leftover parts from previous runs (sometimes several years past). They can have different cover materials, blade configurations, shields, etc. and are often made in low numbers. In fact, these SFAs are considered by some to be the real gems of the Rendezvous due to their limited and unique nature. Many SFAs in recent years have been S knives, which are essentially cosmetic seconds and don’t carry the warranty. One should keep a sharp eye out when entering the store during the Rendezvous, as especially attractive SFAs can sometimes hide in plain sight.

An SFA #25 with two other patriotic GECs

How early do I have to get there to buy a Rendezvous Special knife?

Honestly, it’s impossible to know. I thought last year couldn’t be beaten, when I got there at 10:15 Thursday morning and was already the 27th place in line. But alas, I was foolish to think that people wouldn’t take it further. This year, 2024, two long time fans (and friends of mine, no negativity thrown their way here!) parked a camper outside the factory on the SUNDAY before, a full 5 days before the event. Not only that, but I’m told as of today (Wednesday, two full days before) there are over 15 people waiting. That said, last year people who got there relatively late (meaning in the early morning on Friday, say 5am or so) were able to get a Rendezvous Special because some people passed on them. It’s just not something that can be calculated in advance, but the baseline seems to have passed my reckoning. My understanding is that getting a knife is often easier on Saturday, despite the lower number available. Either way, good luck to anyone who goes for a Rendezvous Special!

The man himself, Bill, showing off a past Rendezvous Special

Should I say hello to the guy wearing a Knife Thoughts shirt?

Yes! I can likely be found sitting at a table exhibiting for Knife Thoughts and / or the Barlow Bearcat Club, talking with other enthusiasts and perusing their tables, or oogling all the great knives in the store. Please stop and say hello, introduce yourself (I’m not good at putting usernames to faces), and grab some Knife Thoughts swag! My favorite part of the Rendezvous is seeing other enthusiasts, so please help the Rendezvous be great and don’t be a stranger.

Processing…
Success! You're on the list.

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts

Bootleg 2020; A Smashing Success!

I attend the Great Eastern Cutlery Rendezvous every year. It’s a gathering of traditional knife enthusiasts at the GEC factory to show and discuss knives, take tours of the factory, and get some unique knives. You can find more information in the following article:

Unfortunately, due to the Corona Virus crisis, Great Eastern Cutlery decided to cancel the Rendezvous this year. It was a big disappointment to me, and I’m sure to many others, but I understand why they had to make the decision.

Relatively quickly after this decision was announced, some regular attendees set in motion to organize an unofficial gathering in place of the Rendezvous. Jesse W. contacted the location and caterer that was always used for the Saturday picnic and, along with contributions from Gary K. and Darren O., set up a replacement gathering. Setting this all up was no small feat, I’m sure, and set the stage for the success of the event.

In the process of being setup the event began to be called “Bootleg”. I decided that if we couldn’t have a Rendezvous Special knife, it would be nice to have at least something to commemorate the event. Since GEC often includes pins with their knives and has been making special pins for the last few years’ Rendezvous, I decided to make pins for all the attendees. I’m no graphic designer, by any stretch of the word, but I came up with something and got a bunch made by Sticker Mule (who I’ve used for several sticker designs). I was happy to make a small contribution, and I was surprised to find Randy (an engineer at GEC and fellow knife enthusiast) laser etching the logo onto all kinds of things: slips, sheaths, and even knives! It was a very nice gesture that allowed people to go home with mementos of the event.

The event was well attended and a whole lot of fun. A significant group of regular Rendezvous attendees, as well as some GEC employees, showed up. The hours rushed by while we all showed and discussed our knives, knife history, and all kinds of knife related topics. I had a great time, and I think others did also.

Still, I’m looking forward to next year and having the full Rendezvous. If you plan to attend next year’s Rendezvous, consider joining this Facebook group. I’ll be there!

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts

Great Eastern Cutlery Cancels 2020 Rendezvous

If I’m being honest, I saw it coming; Pennsylvania has extended the state of emergency, safety measures that had been relaxed have been reinstated, and the Titusville Oil Festival (with which the GEC Rendezvous was always concurrently held) was canceled. Still, I’m sure it was a hard decision for Bill and everyone at GEC to make, and I’m very crestfallen.

If you want to learn more about the Rendezvous, check out the article at this link.

The perfect meme for this news

I collect the Rendezvous Special knives, which you can only get at the Rendezvous. Check out this link and this link for videos on those knives. Still, worse than not having the opportunity to obtain this year’s piece of that collection is the missed discussions with other enthusiasts (and many collectors with much more knowledge than me, from whom I’ve learned a lot at past Rendezvous). However, it would have been difficult to maintain the current safety protocols and enjoy the Rendezvous as it has been in the past. Hopefully GEC has something else fun up their sleeve, and hopefully this isn’t too much of a blow to them.

What is a “Parts Knife” or “Special Factory Assembly” from Great Eastern Cutlery?

Great Eastern Cutlery is wont to run by their own rules. Quirkiness is one of their most characteristic attributes, and both the boon and bane of collectors depending on the situation. One example of their unusual approach to knifemaking can be seen in their “parts” aka “special factory assembly” knives. This article will explain what these knives are, how they are purchased, and how they fit into the collector market.

My haul from the 2019 GEC Rendezvous

These knives are built using leftover parts from previous runs of knives. Sometimes they are made from recent runs within the same year, and sometimes they’re made with parts from frames that haven’t been used for several years (like this year’s #65s). They often feature different handle materials, shields, and sometimes even different blade or handle shapes than previous runs (from which they drew their parts). For example, at this year’s Rendezvous (2019) GEC had lots of knives built with parts left over from previous runs: #65 Ben Hogans, #85s in different configurations than the normal runs, #97s with the Tango guitar shield (which they haven’t used in a while), and even some stainless #74 Mustangs (I was lucky enough to snag one!). Due to being made in previously unused configurations with old stock parts, you never know what these knives are going to show up as!

The Special Factory Assembly aka parts knives for 2019

GEC first referred to these knives in question as “parts knives” but has transitioned into calling them the more official sounding “special factory assembly” knives. This change in nomenclature has happened over the past two or so years, in conjunction with a change in how they are sold. These knives are only available for purchase at the factory store. They are made for the annual Rendezvous (if you’d like to learn more about why the Rendezvous is worth attending, read my article linked here). Originally, up until 2017 or 2018, there was no restriction on the number of these knives that one could purchase at a time. However, recently GEC has restricted each person to one “SFA” knife per transaction / time through the line at the Rendezvous / day at the Rendezvous. This rule makes it more difficult for a large number of these knives to be concentrated in one person’s collection, therefore making them even rarer and more sought after on the secondary market.

Not technically a Special Factory Assembly, but definitely a parts knife. #93 Lambfoot for Charlie Campagna, 1 of 27

These “special factory assembly” knives are sought after for several reasons. First, they tend to be made in low numbers. GEC has moved generally toward larger runs, so the fact that these parts knives are still made in runs of 4-40 knives makes them quite rare relative to other recent runs. On top of this, many of this year’s SFA knives were “S” models (I’ll be doing an article on what this means also, so make sure you subscribe via email for updates) which are less desirable due to their lack of warranty and supposed lower aesthetic quality. Beyond their rarity, the sheer fact that the SFA knives can only be purchased at the factory store makes them more difficult to purchase, and therefore more valuable. The “special factory assembly” knives tend to be highly sought after, especially just after the Rendezvous.

2019 Special Factory Assembly GEC #74 Mustang

I personally enjoy the “parts” aka “special factory assembly” knives because they’re just plain unique and interesting. I also enjoy that they’re a hallmark of and a keepsake from each Rendezvous. If you ever get a chance to pick one up, I highly suggest you do!

Knife Thoughts at the 2019 Great Eastern Cutlery Rendezvous

This past weekend Great Eastern Cutlery held their yearly Rendezvous. It’s a combination of several things: a gathering of GEC enthusiasts, an open house, and (since 2018) a small knife show. I’ve gone the last 6 years, and always look forward to the trip. If you want to know more about the Rendezvous in general, checkout my article here:

2019 is the second year GEC has offered tents and tables for collectors and vendors to set up displays, and this year I decided to set up as Knife Thoughts. I wasn’t sure that it was a good idea to set up a display, being that my collection and knowledge pale in comparison to that of many of the collectors who attend the Rendezvous, but I decided to go for it. I thought I could offer something worthwhile mainly by displaying the last 6 years (2019 inclusive) of Rendezvous Specials. In all the years I’d gone, I never saw any of the Rendezvous Specials displayed and I felt people would enjoy seeing them. I also wanted to display my Allegheny Mountain Knife Collectors Association club knives.

If you want to know more about the parts knives, subscribe for updates via email, as I plan to write a short article explaining them.

After waiting in line all night and getting my 2019 Rendezvous Special and a Special Factory Assembly, I set up my first public knife display! I used a very nice stepped display given to me by my wife to display the Rendezvous Specials, a magnetic kitchen knife holder to display some fixed blades, and laid out many of my traditional pocket knives in a semblance of order.

Knife Thoughts display the 2019 GEC Rendezvous (and a little shirt flair)

It turned out to be a great experience! I had many people stop at my table to discuss the knives and GEC in general. I also got to see some old friends from previous Rendezvous, and meet many new friends. I got to meet and talk with Mike of Collector Knives, Austin of C. Risner / Traditional Pocket Knives, and Jamie of JSR Sports & More. I also got to see and talk with Ken of Blue Creek Cutlery / Maher & Grosh, as well as Gary of Kifer Cutlery Classics, whom I’ve seen at previous Rendezvous. It’s always a treat to get to discuss knives with others who share your enthusiasm for all things cutlery!

I also learned a few things in the process. First, I should bring knives I plan to sell and have their prices pre-determined. Pretty much everyone who came to my table asked if I was selling. Even the knives I was willing to sell, I didn’t pre-plan pricing which made it awkward trying to give an asking price. Second, it would be easier to have a table and still be able to look around at the other displays with a partner to help watch. Thirdly, I should have a Knife Thoughts shirt and/or banner to help distinguish and identify my display (rather than just stickers). So not only was this Rendezvous a fun time, it was a learning experience to help improve Knife Thoughts displays at future shows.

A Special Factory Assembly #93 Lambfoot for Charlie Campagna