Knife Thoughts: The Benchmade 940, a classic EDC for a reason, NOW WITH 100% MORE CONTROVERSY!

Purely by coincidence, this article is being released on the heels of a social media firestorm surrounding Benchmade. Earlier this week, I believe on Wednesday 2/20/19, Benchmade came under heavy scrutiny by the 2a / second amendment online community for its involvement in the destruction of guns for the Oregon City Police Department. Apparently some amount of firearms that were confiscated by and / or given to the department and slated for court ordered destruction were destroyed by Benchmade due to their having “specialty equipment”, through a partnership with the department. I mention this not to involve politics or my own beliefs regarding firearms and knives and their direct relation to the second amendment, but rather the opposite; I want to acknowledge the currently hot topic and assure my readers that this review was written before the issue arose and was in no way affected by it.

So, what is there to say about the Benchmade 940? It’s one of the most recommended and highly regarded every day carry knives on the market. It’s been one of Benchmade’s top sellers for almost twenty years since its release in 2000. You can find countless videos and articles recommending the 940 with nary a mention of any negative attributes. A knife with such a glowing reputation must really be one of the best, right?

In a word; yes. But that’s not why you’re here. You’re here spending your time reading an article about a knife because you want to know the details. Well here… we… GO:

The Benchmade 940 was designed by Warren Osborne and has several of the features that since have become his signature. It features what Benchmade calls a reverse tanto blade shape, which is basically a drop point with a swedge that has an angle at about 45 degrees going from the spine to the edge. (Benchmade also makes a version of this knife with a clip point blade shape, which you can find on Amazon at this link) The steel is s30v, which was one of the first “super steels” and, although it has fallen out of vogue in the high end knife community, remains a great all around stainless steel that isn’t too difficult to sharpen, holds a working edge well, and is pretty corrosion resistant. The reverse tanto blade shape allows the 940 to retain most of the stock thickness most of the way to the tip, and therefore have more strength than a fully flat ground (or distal tapered) blade. It also makes the tip sit well within the frame of the handle, which is something I really like but isn’t mentioned often. This means that the knife can be sharpened many many times before the tip raises above the handle, requiring a blade replacement. The blade is thinly ground enough to work for most typical utility and edc cutting tasks but thick enough to handle some tougher tasks. It might not slice cardboard as effortlessly as a tall full flat ground Spyderco blade, but I’m also more comfortable cutting zip ties and other things that take more force with the 940 than with a thinner blade.

Speaking of the tallness (or lack thereof) of the 940’s blade, it is very slender from edge to spine. That lends itself well to the overall small package that the 940 presents in comparison to the edge and blade length of 3.375″. That’s a solid amount of usable edge fit into a (likewise very slender) 4.75″ handle with 3.5″ of usable grip length. Although that amount of grip space would be crowded if the handle turned up at the butt, because it has a down turn at the end of the handle it actually provides an ample hold. This handle is another example of how a simple design often offers better ergonomics than a more complicated attempt to fit the hand. The handle on the standard 940 is made of aluminum that has been anodized green with a purple backspacer. I personally like the feel of anodized aluminum and the look of the green and purple together but, again, aluminum is a material that has lost the favor of the knife community. For this reason Benchmade later came out with the 940-2 with a black g10 handle with green standoffs, which you can find on Amazon at this link. As an upgrade to both the handle and blade materials, Benchmade also released the 940-1 with a solid carbon fiber handle and s90v steel blade, which makes the knife lighter and (depending on your taste) fancier looking with better edge holding at a more premium price. (You can find the 940-1 on Amazon by following this link)

• 

• 

All of the versions of the 940 have partial steel liners, which are a requirement for any knife with Benchmade’s Axis lock. The Axis lock is an evolved version of the “bolt action” lock, and works by having an “Omega spring” (a sort of constant force spring made of round wire rather than flat steel) push a bar that is suspended by studs on either side of the handle behind the blade tang and therefore wedge it open. The Axis lock is unlocked by pulling both or either of the studs back. It as an easy to use and fully ambidextrous lock, and is one of the big attractions of Benchmade knives. It makes the knives very easy to open and close by simply pulling the lock back, making for a fairly fun fidget factor. Although I think it’s a quite rare issue, Omega springs have been known to fail and break making the lock unreliable. I don’t think this happens often enough to be an issue, and Benchmade will definitely fix it if it does happen to your knife, but I do think it makes it slightly less durable in the very long run than well made examples of other locks (back lock, liner lock, etc.).

The 940 comes with a classic Benchmade clip, but I highly recommend calling or emailing Benchmade and requesting a deep carry clip as is pictured on my knife. I find that it carries deeper in the pocket and doesn’t significantly affect the ergonomics in use. Benchmade is normally happy to send a free clip upon request.

Speaking of Benchmade’s service, it’s one of the great values of this knife. Benchmade offers lifetime sharpening (which they call LifeSharp), cheap blade replacement, a general spa service, and a normally pretty reasonable turn around time. That can’t be said for all knife companies, and it’s something that can weigh heavily in favor of Benchmade if you’re looking for a knife to last you a lifetime. However, I do think it also factors into the price of the knife, so don’t be afraid to use that LifeSharp service!

Over the last few years Benchmade has come under some criticism for a lack of quality control, specifically with uneven grinds and off centered blades. Although my 940 is slightly off center it doesn’t touch the liner and hasn’t worsened since I adjusted the pivot. The grind seems even enough to my eye. I haven’t had any issues with lockup or action on any recent Benchmades. My 940 has no blade play in any directions and opens and closes smoothly with one hand.

To come to the point where I might add something new to the 940 conversation, I think this knife’s slenderness is both its best and worst attribute. Its slim handle and blade make the 940 a breeze to carry and allow it to offer a really solid amount of cutting power in a small package. I think this ease of carry combined with the convenience of the Axis lock and security of Benchmade’s warranty are what have made the 940 such a star in the EDC knife world. However, such slenderness also has its downfalls. Because the blade rises so slightly out of the handle the thumb studs are close enough to the handle that it can sometimes be a tad difficult or awkward to open the knife quickly. Also, because the blade is short from edge to spine it does offer less belly and a thicker edge in comparison to some other models. Still, I think these are minor complaints that are far overshadowed by the positive attributes of the 940. You can get the Benchmade 940 for about $180 at this Amazon link. Although relatively pricey for the materials used, like all Benchmade knives it is made in the United States and backed by their highly trusted warranty. If you’re looking for a knife that you can put it your pocket and not notice until you need it, that you can rely on for almost any cutting task you’d run into in your daily life, and that can last you a lifetime the Benchmade 940 is a solid time tested and proven option.

All the links to Amazon in this article are Amazon Affiliate links. That means that if you click them and purchase the product you won’t pay any more than you normally would on Amazon, but I get a commission from the sale. This is just a way for you to support Knife Thoughts and allow me to procure more funding for the project and its knives.

I sincerely thank you for your time, support, and interest! Don’t forget to tell your friends about KnifeThoughts.com, subscribe via email, and share this article on social media. You can find Knife Thoughts on YouTube where I have hundreds of knife videos, as well as on Instagram and Facebook! You can find all my latest links at LinkTr.ee/KnifeThoughts