Great Eastern Cutlery manufactures knives based on traditional patterns with classic materials and construction, and in that endeavor they’ve reproduced many of the most timeless knife designs. From the ever popular working man’s Barlow to the Congress made famous by its inclusion in President Lincoln’s personal goods, they’ve put their own spin on a myriad of classic American folding knife and fixed blade patterns. Their versions of the classic sod buster pattern show how they can breathe new life into an age old design.
Now, first off, neither of these knives are named after the sod buster pattern directly because a certain other cutlery company has trademarked the pattern name. The ethics of trademarking a general industry term aren’t the point of this article, but I just wanted to point out that that situation is why you won’t see or hear anyone at GEC refer to these as “sodbusters”. Instead, they’ve named the #71 and #21 patterns the Bull Nose and Bull Buster, respectively. Still, they are sod buster style knives because they have the simple handle with upswept butt, single skinner blade, and no frills construction that define the pattern.
The #71 came first, with the original run being produced in 2012, and is the smaller of the two at around 3.875″ closed. Interestingly, the #71 pattern was first produced in O1 steel under what GEC initially called the Redneck Farm Tool brand. Similarly to the pattern name itself, apparently this was too close to being a trademark issue and they renamed the pattern and launched the Farm & Field brand. The #21 was first produced in 2014 and is a good bit larger at about 4.625″ closed.
Aside from the size, the design and construction of the two patterns are next to identical. Both have 1095 carbon steel, which has become the norm for the vast majority of GEC made knives. Both have steel liners and a lanyard hole. Both have a nail nick for opening, and mine have all been pinchable (able to be opened by pinching the blade with thumb and forefinger, rather than with the nail nick). Both are shadow patterns, meaning they have no bolsters. Being shadow patterns, they feature a bird’s eye pivot which is a metal collar into which the pivot pin is peened (hammered to form a press fit). The pivots on recent models are stamped “F&F USA” with two stars on each side, and the tangs are stamped “Farm & Field Tool USA” on the mark side and “GEC CAR” and the model number designation on the pile side. I have included a link to GEC’s model number / tang stamp chart above. As indicated in it, these knives both have what GEC refers to as a “skinner” blade. It seems they consider the skinner blade shape to be differentiated from their drop point blade shape by the more abrupt belly (upward curve toward the spine and tip), but both shapes hold the “5” blade designation on the tang stamp chart. Both have half stops. They’ve both been made in several handle materials, often including black delrin, orange delrin, and different types of micarta.
Both patterns also have similar Farm & Field Tool brand fit and finish. Farm & Field is Great Eastern Cutlery’s brand under which they produce knives made to be truly used as tools. Knives under the F&F brand are GEC’s most budget friendly knives. With this in mind, there are some differences in construction and fit and finish compared to GEC’s other brands. First off, the knives under this brand tend to have less expensive handle materials (like delrin and micarta vs bone and wood). The lack of bolsters requires fewer manufacturing processes and therefore also contributes to the lower prices. They also have less handle contouring and polishing. Both the #71 Bull Nose and #21 Bull Buster have thicker handles than most of GEC’s knives. Although this can make them more comfortable in the hand for tough cutting jobs, it’s also due to less finishing time spent on the handles. Certain things like small gaps between the backspring and liners, slight handle imperfections, or imperfect centering are also more likely to be considered acceptable on knives under the Farm & Field Tool brand.
That said, the Farm & Field Tool brand knives are still extremely well made knives. I’ve had several of each of the #71 and #21 patterns along with some other knives under the F&F brand, and they’ve all been generally really well built and ready for a lifetime of use. These two fit that description. The Bull Nose has a slight imperfection in the handle material next to the liner on the backspring, and the Bull Buster had a sliver of liner sticking out that eventually fell off on its own. The one practical issue I’ve had with these is one that, from the sounds of things on the forums etc., others have also encountered. The smaller #71 Bull Nose seems to sometimes suffer from blade rap. Blade rap is when the snap of the blade’s closing makes the edge bounce on the inside of the backspring, thereby damaging the edge (usually a roll in the edge). This edge damage by no means makes the entire blade unusable, but it does cause issues in cutting and can be extremely frustrating. That frustration is often compounded by the fact that the only way for the knife user to fix the issue is to sharpen the blade rap out, meaning they have to sharpen the edge down to the level where it no longer reaches the backspring upon closing. This process can be extremely time consuming and also can shorten the usable life of the knife, due to the removed steel. I had blade rap on a previous #71 that I had to sharpen out, but initially I thought that the two knives featured in this article were both free of blade rap. Unfortunately, actually while filming my linked YouTube video on these knives, I realized that the #71 did have blade rap. However, after two sharpenings with a diamond stone the edge damage and blade rap seems to be gone for good (at least on this knife). I think this issue tends to arise on the smaller #71 and not the larger #21 because the blade well offers less extra room in which the blade can travel as the knife closes.
As for the designs of these knives, I think they hit their mark well as simple but well made work knives. The handle on the Bull Nose is just large enough for me to get a full four finger hold of the knife in a hammer style grip, but is more than large enough for the more practical and more often used pinch style grip. The rounded butt of the handle also helps to secure the knife in this grip. Altogether, this makes for good ergonomics even if my (admittedly rather wide) hands wouldn’t hate another half inch or so of handle. Even with my large hands, the significantly larger Bull Buster offers more than enough grip area and feels spacious in any type of hold. The extra width of the handles, compared to most traditional knives, does make them a little less comfortable to carry in a back pocket (as I do), and this characteristic is especially evident on the larger Bull Buster. However, I think both can be carried easily enough to make them good every day carry options if you’d like something you can throw in your pocket and use and not worry about scuffing up. I appreciate the semi strong pull / backspring strengths on these knives, coming in at about a 6 or 7 out of 10, especially with the design intent of using them in a tougher role than most traditional knives. The skinner style blade shape is pretty good for general use and I doubt anyone will find too much practical fault with it, though I have to say I prefer the look and sharpenability of GEC’s normal drop point shape.
Overall, I would definitely recommend either of these knives if you want a low cost high utility user traditional knife made in America. Which you choose mostly depends on how big a knife you prefer, and whether you are okay with risking blade rap and the resulting necessary work to sharpen out the issue (it’s important to note also that I have only had blade rap on the 2018 Bull Noses, not the ones from previous runs). I think these are a great value at the price they cost, which is about $55 for the #71 Bull Nose and about $65 for the #21 Bull Buster. I also think that it’s great that GEC is able and willing to offer such well made high value knives while not compromising on their quality.
Well written and enjoyable Logan.
Thanks Steve! Glad you enjoyed it.
Nice write up, Logan! One small error you might want to correct: you said “both knives have brass liners,” but the liners on these F&F knives are steel.
Good catch!