This article will tell you all you need to know about the Allegheny Mountain Knife Collectors Association 2019 club knife. To put it simply, the knife is a Great Eastern Cutlery made Northfield #97 Allegheny in Autumn Gold Jigged bone. It’s a unique knife and an extremely fine knife. This article will explain the details on how it came about, it’s makeup and quality, and my thoughts on the knife as a whole.
First off, what is the Allegheny Mountain Knife Collectors Association? The AMKCA is a knife club that meets once per month to show off knives, discuss current events in the knife world, and share the passion for knives. The membership is made up of collectors who, for the vast majority, primarily collect vintage knives. Some of the members are also interested in modern knives, but traditional slipjoints and fixed blades dominate the display boxes and knife rolls. Even with a relatively small regular attendance, at around 10 members, it’s always a treasure trove of incredible knives to “chicken eye and coon finger“. The members have also welcomed me with enthusiasm each time I’ve been able to make it to a meeting, despite my attendance being often irregular. The long time members are well acquainted with Great Eastern Cutlery, despite focusing their collections on vintage knives, and some even seem to be personal friends with Bill Howard (the owner of GEC). AMKCA was founded in late 1982 and has ordered a club knife each year since 1983, and the list of their yearly club knives is a sight to be seen for any traditional knife enthusiast. I first heard of the Allegheny Mountain Knife Collectors Association, funnily enough, by seeing their logo on a cornhole set at the GEC Rendezvous. I also met and spoke with a couple members at one of the Rendezvous I’ve attended, maybe 2016. However, I didn’t become a member until early 2018. Since then I’ve attended meetings as regularly as possible (as the meetings are the real value of being a member), including bringing my fiancee to the club’s very nice Christmas party, and I’ve also purchased the yearly club knives for both 2018 and 2019.
This year’s club knife has an interesting, and somewhat confusing, story of how it came about. At the end of 2018 the club discussed getting a 2019 knife in stag on one of GEC’s new patterns, the #97 or #29. I wasn’t able to make the January meeting due to a vacation, but at the February meeting the liaison between the club and GEC said that Christine (GEC sales manager) had suggested the new #97 Allegheny large coke bottle pattern in Smooth Yellow Bone, due to a shortage of stag large enough for that pattern, and that the club needed to decide ASAP. Due to this suggestion, and the genuine fact that GEC is very accommodating in allowing the club to order a small number of knives each year (in comparison to GEC’s recent knife run quantities), the members voted to go ahead with the #97 Allegheny in Smooth Yellow Bone with the AMKCA blade etch and bear shield on Northfield trim (the Northfield trim on this pattern included polished blade and bolsters, a saber ground blade, double pull, and lined bolsters). A little while later the president of the club messaged me to let me know that GEC had offered jigged yellow bone for the handle material, and to see what I thought of that. I was all for it, as I don’t have a jigged yellow bone handled knife.
However, soon after that GEC posted a picture of the AMKCA club knife with Autumn Gold Jigged bone handles. Now, one of the things that you get to know about Great Eastern Cutlery after following them is that Bill Howard isn’t afraid to do things his own way, and their naming of handle materials, colors, and jigging patterns can be both redundant and random. For example, they often make a handle material called Antique Yellow Jigged bone that isn’t what most people would recognize as yellow (although a little yellow peaks through where the bone meets the bolsters). Still, Autumn Gold is not Antique Yellow, let alone plain yellow. So I checked with Christine and she confirmed it was Autumn Gold, but then a few days later I got the club newsletter shown below which seems to suggest that the knife would be plain yellow bone jigged! So I was very confused. Going into this month’s meeting (5/5/19) I was excited to see what version actually came to fruition.
As it turned out they are handled in Autumn Gold Jigged bone after all, and wow did they turn out great! First off, despite the confusion, I like the Autumn Gold color and the jigging pattern a lot more than I expected. I don’t always love jigging, particularly when the jigging pattern is uniform rather than random, but I think the large jig marks and side to side pattern fit the knife and look traditional. The color is also more caramel malty than plain brown, as some of the Autumn Gold bone I’ve seen has been. Although I still don’t think it would be my first choice, I am really happy with how the Autumn Gold jigged bone looks.
The fit and finish of this knife is plainly incredible. There are no visible gaps between the backspring and liners, even when held up to the light. This is not an easy feat to accomplish on a traditional knife, and even GEC made knives (the best production knives you can get) sometimes have small gaps. The transitions between the bone and bolsters are smooth with no catching, another area that really demonstrates the care put into hafting the knife. The backspring is flush with the liners in the open and closed positions. All three of these attributes are areas that collectors look at to assess the quality of the construction. One thing that some of the collectors at the AMKCA dislike about GEC is their “sunken pins”. Sunken pins are those that are spun and countersunk, rather than being flush with the handle and held in place by hammering the face of the pin to expand it creating a press fit (a process known as “peening”). Most vintage knives are peened and have flush pins. I started out by collecting GEC knives, so sunk pins are what I’m used to and don’t bother me.
Online, on BladeForums and the like, many people had complaints about light springs and off center blades on the #97s. In their earlier years GEC was known for having bear trap springs, with pull strengths between 6 and 9 out of 10. However, recently some of their runs of knives have had significantly lighter pulls. My #43 Oregon Trapper had a light pull strength, but great walk and talk and snappy action. The same can be said for my #97 Allegheny. It’s spring is closer to a 4 than a 6, and definitely lighter than most GEC knives I’ve had, but it has superb walk and talk with snappy action and buttery smooth opening and closing. If you want to get a better feel for the action, make sure to watch my corresponding video review linked here and at my YouTube Channel (and don’t forget to subscribe!). My blade is nearly perfectly centered, and certainly nowhere near an issue. The knife also has absolutely no blade play. I was slightly concerned that there might be blade rap (the edge hitting the backspring) because larger knives like this sometimes overtravel when closing, but as far as I can tell there’s none to be seen on my Allegheny. Overall, the attention to detail and immaculate fit and finish make this one of the best made knives I’ve ever received.
The only issue I’ve found is a small one and could easily be missed; the blade etch is slightly doubled, as if the stencil moved minutely during the etching process. It’s difficult to see, but the bases of the letters and the bars/lines are doubled just enough to perceive when you look closely. This is definitely more of a nitpick than an issue, and not something that would matter in the least in use, but I try to be as honest as possible and don’t hide any negatives. The fact that this is the only issue with the knife honestly just gives more credence to its overall excellence.
One last point about the knife’s construction that came as a surprise to me; the AMKCA bear shield is glued. The Allegheny Mountain Knife Collectors Association has used a unique bear shield that resembles Bob Cargill’s three legged buffalo shield for decades. I like the look of the shield, but in checking inside this year’s club knife I noticed that there seemed to be no shield pin through the liner. I knew this meant that the shield was not pinned, but rather glued. I strongly dislike glued shields. In fact, GEC’s usual habit of ALWAYS pinning their shields is one of the things that signals their dedication to making knives the right way. Glued shields are a sign of a shortcut taken, as it’s much easier and less work intensive to just glue the shield into the handle material than to take the time to drill the hole, place the shield just right, and peen it into the handle liner. There’s just something less secure and classic feeling to a chemical bond holding the shield on rather than a mechanical bond. Now, I don’t think GEC did this as a shortcut; they had to do it, as there was no way they could pin the shields. It just so happened that another member of the AMKCA had a previous year’s club knife (also from GEC) with him that’s shield had fallen out! Upon further inspection of that dislodged shield, I found that the bear shields were not manufactured with pins. Aside from showing that GEC couldn’t have pinned the shields even if they’d wanted to, it also confirmed my dislike of glued shields. Heck, a glued shield is okay on a $10 Rough Ryder but it’s kept me from buying a $50 Case and it’s downright unacceptable on a $100+ GEC. Although I do like the look of the bear shield that AMKCA uses, I really dislike the fact that it must be glued and that fact honestly cheapens all the knives with that shield in my opinion.
All things considered, I’m very happy to have this knife in my collection. I really enjoy the coke bottle pattern, and this completes my trio of GEC coke bottle patterns they’ve made so far. If you’d like to learn more about the coke bottle pattern you can check out my article on the GEC #06 Pemberton. It’s a rare, unique, and extremely well made knife. It also represents the time I’ve spent at the Allegheny Mountain Knife Collectors club. I have decided to collect the GEC Rendezvous Special knives and the AMKCA Club knives, and I’m glad this club knife came together so well despite the confusion. If you’re interested in a Coke Bottle Hunter pattern knife, you won’t go wrong with a Great Eastern Cutlery #97 Allegheny. If you’d like to get one for yourself you can find several versions at a few of my favorite knife dealers: Blue Creek Cutlery, JSR Sports and More, and Traditional Pocket Knives. These dealers all have given me great customer service. I’m not affiliated with them, but you can let them know you heard about them on Knife Thoughts… can’t hurt! Unfortunately, if you’d like to get this specific AMKCA version you’ll have to get it on the secondary market, and even that would be difficult. I hope this article has painted a full picture of the 2019 AMKCA Club Knife Great Eastern Cutlery Northfield #97 Allegheny in Autumn Gold Jigged Bone for you, and has gotten you as excited about it as I am!
